T 300 2018-04-11T07:53:04+00:00

Project Description

T 300 – Shredder machine

This foamshredder works on the principle of a drum-cutter. The rotating drum is equipped with 3 rows of knives which can shred any type of foam.
The size of the foam-shreds is determined by the speed of the belt conveyor which feeds the machine. The speed can be easily adjusted through an inverter.
An extractor fan and a dustfilter are supplied as standard equipment included with the foamshredder. The extractor fan allows to load the shredded foam directly into another container (i.e. our SR3-S storage silo or M1 blender).
Due its solid and simple construction, the machine is virtually maintenance-free, thus assuring long and reliable service.
The drum-cutting principle allows for a high processing capacity (up to 300kg/h) and the handling of blocks of foam up to 30x30cm while containing the power absorption below 15kW/h.

It is equipped with a filtering head for the recovery of processing dust, preventing it from ending up in the bags or in the next machine (eg M1 blender).
Disconnector switch and low voltage controls.

The machine is built according to the requirements of the European Directives 2006/42/CE, 2004/108/CE, 2006/95/CE and subsequent amendments. The machine duly bears the CE marking.

Technical data

Capacity: 200-300kg/h according to the density of the processed foam
Width: 110cm
Length: 180cm
Height: 150cm
Weight: 650Kg
Motors: 3 three-phase motors with a total power absorption of 13,5kW

Figures, descriptions and technical data are non-binding and can be subject to change without notice.

RELATED PRODUCTS