Project Description

RAV 3 – Filler Machine

This high-speed filling machine (8500rpm) is particularly suited to fill apparel with short fibres or down.

The filling process is activated by means of a pneumatic foot pedal, leaving the operator’s hands free to handle the item to be filled

The filling nozzle has diameter of just 40mm and is equipped with an air-discharge system, thus making it possible to fill very small pockets.

Engine-braking takes place in approximately four tenths of a second and does not require any maintenance since it is achieved electronically.

All parameters for acceleration, speed, deceleration and braking can be adjusted to suit individual requirements. Speed can be adjusted immediately through an inverter switch.

This machine has been produced in accordance with directives 2006/42/EC, 2004/108/EC and 2006/95/EC and subsequent amendments with CE marking.

The machine is built according to the requirements of the European Directives 2006/42/CE, 2004/108/CE, 2006/95/CE and subsequent amendments. The machine duly bears the CE marking.

Technical Data:

Width: 50cm
Length: 40cm (excluding filling nozzle)
Height: 104cm
Weight: 52kg
Motor: 1,1kw three-phase

Figures, descriptions and technical data are non-binding and can be subject to change without notice.