Project Description

R 3P – Filler for pillows

This filling machine can process polyester, down, shredded polyurethane foam, cotton, wool and any other type of material which can be transported by airflow.
The particular shape of the turbine provides excellent performance when filling.
The filling machine can be connected to any kind of silo, blender or other sort of container from which it draws filling material.
There are two pneumatic shutters, one on the material intake side and a second one on the filling nozzle. During the filling process, they open and close in sequence, thus making sure that the turbine is always empty of filling material once the filling process has been completed.
The motor rotates continuously with no electric nor mechanical breaking action, thus increasing lifespan of the motor and reducing maintenance.
The filling process is activated by means of a pneumatic foot pedal, leaving the operator’s hands free to handle the item to be filled.
The machine is available with a single-phase or three-phase motor and is equipped with a motor overload protection.
Also available in R3-PV version, equipped with an inverter which allows to adjust engine rotation between 1600rpm and 4200rpm.
The machine is built according to the requirements of the European Directives 2006/42/CE, 2004/108/CE, 2006/95/CE and subsequent amendments. The machine duly bears the CE marking.

Technical Data:

Width: 51cm
Length: 61cm
Height: 110cm
Weight: 90kg
Motor: 2,2kW / 2900rpm
Compressed air: 3bar

Figures, descriptions and technical data are non-binding and can be subject to change without notice.