Project Description

PAV 4 – Filling machine

This high-speed filling machine (8500rpm) is particularly suited for filling apparel with short fibres or down.

The filling material is weighed manually in a 50-litre metal container fitted on load cells. The weighing accuracy is 0,2g and the emptying takes place by manually lowering a suction tube, which connects to the blower, down into the container.

Once the desired weight is reached, the filling process is activated through a foot pedal, leaving the operator’s hands free to handle the item to be filled.

The filling nozzle has diameter of just 40mm and is equipped with an air-discharge system, thus making it possible to fill very small pockets.

Engine-braking takes place in approximately four tenths of a second and does not require any maintenance since it is achieved electronically.

All parameters for acceleration, speed, deceleration and braking can be adjusted to suit individual requirements. Speed can be adjusted immediately through an inverter switch.

The machine is built according to the requirements of the European Directives 2006/42/CE, 2004/108/CE, 2006/95/CE and subsequent amendments. The machine duly bears the CE marking.

Technical data

Width: 40cm
Length: 85cm (excluding filling nozzle)
Height: 165cm
Weight: 65kg
Motor: 1,1kW three-phase

Figures, descriptions and technical data are non-binding and can be subject to change without notice.

RELATED PRODUCTS