Project Description

CT 50 – Carding Machine

This carding machine is built for medium-long fibres (mainly wool and hemp) and is ideal for large production volumes.

The cylinder has 4 combs which can easily be replaced.

The material is manually loaded on a belt conveyor equipped with a hand protection roller.

The 2 feed rollers are motorized and their speed can be adjusted through an inverter.

The machine is equipped with a reverse gear in order to release the material in the event of overloading.

An extractor fan can be connected to the machine in order to aspirate dust where the carded material is discharged.

The upper casing is hinged to facilitate cleaning of the combs.

The electrical system is housed in an IP66 standard cabinet equipped with a disconnector switch and low voltage controls.

The machine is built according to the requirements of the European Directives 2006/42/CE, 2004/108/CE, 2006/95/CE and subsequent amendments. The machine duly bears the CE marking.

Technical Data:

Output: 100-200kg/h

Width: 100cm

Length: 265cm

Height: 138cm

Weight: 260kg

2 electric motors: carding machine 1,5 kW + feed rollers 0,37 kW

Figures, descriptions and technical data are non-binding and can be subject to change without notice.

Accessories available upon request:

 CT 50S

The S-version, which stands for synthetic, of the CT50 has additional combs (8 in total) for the processing of specific resin treated fabrics, non-woven waste and polyester batting.

The machine is ideally connected to the CD2-S4 fine opener in order to re-open the fibre and make it suitable as recycled filling material.

AS2 Extractor fan with two dustbags
– Width: 50cm
– Length: 130cm
– Height: 220cm
– Weight: 55kg

The machine is built according to the requirements of the European Directives 2006/42/CE, 2004/108/CE, 2006/95/CE and subsequent amendments. The machine duly bears the CE marking

RELATED PRODUCTS