Project Description

CT 30 – Carding Machine

This carding machine is built for medium-long fibres (mainly wool and hemp) and is ideal for smaller production volumes.

The cylinder has 4 combs (8 combs in the S version) which can easily be replaced.

The material is manually loaded through a hopper feeder equipped with a hand protection roller.

The 2 feed rollers are motorized and their speed can be adjusted through an inverter.

The machine is equipped with a reverse gear in order to release the material in the event of overloading.

An extractor fan can be connected to the machine in order to aspirate dust at the material intake and where the carded material is discharged.

The upper casing is hinged to facilitate cleaning of the combs.

The electrical system is housed in an IP66 standard cabinet equipped with a disconnector switch and low voltage controls.

The machine is built according to the requirements of the European Directives 2006/42/CE, 2004/108/CE, 2006/95/CE and subsequent amendments. The machine duly bears the CE marking.

Technical Data:

Output: 70-120 kg/h
Width: 67cm
Length: 174cm
Height: 140cm
Weight: 172kg

2 electric motors: carding machine 0.75 kW + feed rollers 0.25 kW

Figures, descriptions and technical data are non-binding and can be subject to change without notice

Accessories available upon request:

Width: 62cm

Length: 90cm

Height: 140cm

Weight: 58 kg

The machine is built according to the requirements of the European Directives 2006/42/CE, 2004/108/CE, 2006/95/CE and subsequent amendments. The machine duly bears the CE marking

RELATED PRODUCTS