Project Description

AB 450T – Bale Braker

This bale breaker for virgin and recycled fibre is ideally suited for feeding the CD2S4, CD2S2 and CD180S3 fibre fine-openers.

The fibre is manually loaded into a hopper feeder with a capacity of approximately 0,5 cubic meters. A studded belt conveys the fibre towards the machine outfeed.

A rotating scraper removes excess fibre while a doffer makes sure that all the fibre is efficiently separated from the studded belt and conveyed towards the outfeed hopper.

The speed of the belt conveyor can be adjusted in order to process the correct quantity of fibre.

The machine can be controlled and switched on/off by other equipment downstream (i.e. a blender or a silo).

The electrical system is equipped with a disconnector switch, motor protections, inverter, and low voltage controls.

The machine is built according to the requirements of the European Directives 2006/42/CE, 2004/108/CE, 2006/95/CE and subsequent amendments. The machine duly bears the CE marking.


Output: 450 kg/h (max.)
Width: 150 cm
Length: 190 cm
Height: 215 cm
Weight: 620 kg
Motors: 3 three-phase motors with a total power absorption of 1,5kW. The belt-conveyor motor is controlled by an inverter.


The machine can be mounted on load-cells (low fibre level alert, automatic stop, etc.)

Figures, descriptions and technical data are non-binding and can be subject to change without notice